2018年10月16日星期二
2018年10月10日星期三
How to solve the problem of printing color difference in cardboard display stand
How to solve the problem of printing color difference in cardboard display stand
How to solve the problem of cardboard display printing chromatic aberration
When we use the cardboard display printing machine, it may often change the color of the printed product after a period of use. In this case, our majority of printing press users often have no way to start, and it takes a lot of time and money. Repair this situation. In response to this situation, I would like to introduce to you a few more effective methods, and hope to play a role in the process of using everyone.
1 First of all, we should check whether the design of our printed matter on the layout is reasonable. For example, the pattern with a relatively large amount of ink is placed in a slight position. For such a layout design, it is definitely not conducive to the printing of high-quality printed matter. We should They are placed in the mouth of the mouth, which is conducive to the control of the paper by the tooth decay, and it is easier to print the printed matter without discoloration. After doing this, our printed matter may solve the problem of discoloration, of course, it can not be solved, if it is done With these efforts, our prints are still discolored as soon as possible to inform the company for repairs and to resolve the problem quickly.
2 After we have eliminated the film problem, we should check if there is any problem with the ink system. We can use the very simple method to check the ink system. First, we use the car wash water (can add water) to thoroughly clean the ink path. After parking, we will stop. It should be checked whether there are white crystalline particles in the ink path. If we find such a substance, the discoloration may be caused by the partial discoloration of the printed matter produced by the crystalline material, which is often reflected in the discoloration. Brush color local color cast.
After the car wash, these crystals were not found. We restarted the press and inked each ink roller. After the ink was finished, we closed the plate roller and the plate water roller to check whether the pressure reached the standard. If not, I recommend re-adjusting all the ink roller pressures to a good condition.
3 After doing this, we can test it. When testing, we should choose a better coated paper for trial printing to avoid the impact of paper problems on us. For thin paper, we should try to open the air volume on the embossing. For thick paper, we should open it in moderation. If there has been a discoloration of the printed matter, we should not start the conclusion of the problem of the printing press itself. We should first look for the cause outside the printing press. We should first use a magnifying glass to observe the dot on the printing plate and check if it is already The deformation of the dot appears. If it is found that the dot has been deformed on the printing plate, then we should check the film to eliminate the problem when the film is released.
4 Check the paper under the paper, which includes the adjustment of the lower paper wind, the flatness of the paper in the front gauge, the cooperation between the paper and the paper, the operation of the paper belt, and so on. After there is no problem in the ink system, we check the condition of the waterway, adjust the pressure between the plate water roller, the metering roller, the water roller, and the water roller. In particular, adjust the pressure of the middle roller. Under the condition of the intermediate water roller, it is best not to use it during the printing process.
5 If the heat still does not solve the discoloration problem after doing this, then we may have to consider the problem of the tooth. We should clean the dental pad, and it is best to remove the spring for cleaning. Some of our manufacturers only have the lead. Knowing to clean the dental pads, I don't know if it is wrong to clean the teeth.
Check for dead teeth, use a high-efficiency rust remover such as WD-40, and oil the teeth and the shaft to ensure that there is no death. If there is no problem with the ink path, we should check if the rubber liner is standard. We recommend that the thickness of the liner should be 35 filaments. The blanket is preferably branded with aluminum strips and the blanket is preferably new. It is best to re-tighten the new blanket after using it for a while.
How to solve the problem of cardboard display printing chromatic aberration
When we use the cardboard display printing machine, it may often change the color of the printed product after a period of use. In this case, our majority of printing press users often have no way to start, and it takes a lot of time and money. Repair this situation. In response to this situation, I would like to introduce to you a few more effective methods, and hope to play a role in the process of using everyone.
1 First of all, we should check whether the design of our printed matter on the layout is reasonable. For example, the pattern with a relatively large amount of ink is placed in a slight position. For such a layout design, it is definitely not conducive to the printing of high-quality printed matter. We should They are placed in the mouth of the mouth, which is conducive to the control of the paper by the tooth decay, and it is easier to print the printed matter without discoloration. After doing this, our printed matter may solve the problem of discoloration, of course, it can not be solved, if it is done With these efforts, our prints are still discolored as soon as possible to inform the company for repairs and to resolve the problem quickly.
2 After we have eliminated the film problem, we should check if there is any problem with the ink system. We can use the very simple method to check the ink system. First, we use the car wash water (can add water) to thoroughly clean the ink path. After parking, we will stop. It should be checked whether there are white crystalline particles in the ink path. If we find such a substance, the discoloration may be caused by the partial discoloration of the printed matter produced by the crystalline material, which is often reflected in the discoloration. Brush color local color cast.
After the car wash, these crystals were not found. We restarted the press and inked each ink roller. After the ink was finished, we closed the plate roller and the plate water roller to check whether the pressure reached the standard. If not, I recommend re-adjusting all the ink roller pressures to a good condition.
3 After doing this, we can test it. When testing, we should choose a better coated paper for trial printing to avoid the impact of paper problems on us. For thin paper, we should try to open the air volume on the embossing. For thick paper, we should open it in moderation. If there has been a discoloration of the printed matter, we should not start the conclusion of the problem of the printing press itself. We should first look for the cause outside the printing press. We should first use a magnifying glass to observe the dot on the printing plate and check if it is already The deformation of the dot appears. If it is found that the dot has been deformed on the printing plate, then we should check the film to eliminate the problem when the film is released.
4 Check the paper under the paper, which includes the adjustment of the lower paper wind, the flatness of the paper in the front gauge, the cooperation between the paper and the paper, the operation of the paper belt, and so on. After there is no problem in the ink system, we check the condition of the waterway, adjust the pressure between the plate water roller, the metering roller, the water roller, and the water roller. In particular, adjust the pressure of the middle roller. Under the condition of the intermediate water roller, it is best not to use it during the printing process.
5 If the heat still does not solve the discoloration problem after doing this, then we may have to consider the problem of the tooth. We should clean the dental pad, and it is best to remove the spring for cleaning. Some of our manufacturers only have the lead. Knowing to clean the dental pads, I don't know if it is wrong to clean the teeth.
Check for dead teeth, use a high-efficiency rust remover such as WD-40, and oil the teeth and the shaft to ensure that there is no death. If there is no problem with the ink path, we should check if the rubber liner is standard. We recommend that the thickness of the liner should be 35 filaments. The blanket is preferably branded with aluminum strips and the blanket is preferably new. It is best to re-tighten the new blanket after using it for a while.
2018年6月19日星期二
HOW TO CHOOSE THE RIGHT COSMETIC DISPLAY STAND FOR YOUR COSMETICS BRAND?
The development of cosmetic display stands is of course closely linked to the development of cosmetics. The cosmetics display stand is an indispensable item for the mall to display cosmetics and skin care products. The design of the display stand itself is designed and customized according to the performance and characteristics of the products. This has played a very good role in the promotion and display of cosmetics information.
Usually we will hesitate to choose what kind of material cosmetics display stand, the most commonly used is acrylic and paper materials. How to choose?
Cosmetics are fast-moving consumer products. They have a short life cycle, are easy to apply repeatedly, and have fast iterations. In many cases, cosmetics should constantly change propaganda, new products, seasonal changes, holiday promotions, so cosmetics display stands should also be able to quickly meet the needs of low-cost cosmetic products. The cardboard display stand can be used to quickly change propaganda information by simply replacing the head cards.
Cosmetics on the acrylic display stand, with special lighting (which will add extra cost), will look very high-end atmosphere. However, cosmetics are popular products. The high-end atmosphere is not close to the people. The use of cardboard cosmetics display stands will not have such problems. The cardboard cosmetic display stands are environmentally friendly, do not require special lights, and the color display is also very good. It is very close to the people.
So, in contrast, overall, it is more suitable to use the cardboard cosmetics display stand to develop our cosmetics brand.
There are many types of cardboard display stands. How do you choose this?
Cosmetic display stands should be customized according to the product, including mask display stands, lipstick display stands, nail polish display stands, body lotion display stands, desktop display stands, floor display stands, rotating display stands, metal hook display stands, etc.
You can check the following cases:
Single product:
The counter display shows a sense of refinement
Landing display integrity is more eye-catching
Product Suite:
Unique styling helps show the whole set of makeup tools
Layers can show different series of products on each floor. Promotion is more convenient
HIC DISPLAY(HICDISPLAY.COM) is a manufacturer,suppliers and exporters of cardboard display stand, paper display,corrugated display,counter top display, supermarket pallet display and other paper products.
2018年3月15日星期四
订阅：
博文 (Atom)